Harmonize Nanohybrid Universal Composite is a light-cured, aesthetic nanohybrid resin composite. The filler load is 81% and the filler particles result in refraction and diffusion of light such that this composite offers a chameleon effect to blend with tooth structure. This composite can be placed, packed and sculpted immediately. It is non-sticky and soft during sculpting – the viscosity then increases to prevent slumping. Light curing should be performed with a minimum light output (LED or halogen) of at least 600 mW/cm2 in the 400-520 nm range. Harmonize Nanohybrid Universal Composite is available in a wide range of enamel, dentin and translucent shades. Each shade can be used individually or blended with other shades for a natural-looking restoration. The composite is delivered in single 4-gram syringes and uni-dose capsules in packs of 10 (2.5 grams) and 20 (5 grams).
Optibond XTR is a two-bottle, light-cured, self-etch universal bonding agent that can be used in direct and indirect procedures.
Research Report designed to evaluate the in-vitro shear bond strength of OptiBond XTR a 6th-generation, Type 1 Bonding Agent.
OptiBond FL is a 4th-generation bonding agent with fluoride-release for use with composite to tooth surface applications. Provided in 8-ml bottles, it is conveniently placed and the manufacturer recommends it as a replacement for conventional liner materials. Components for dual-curing are optional. OptiBond FL was used by 20 clinical consultants and placed in over 400 restorations. This product received a 96% clinical rating.
Short Cut is a disposable retraction cord dispenser and cutter. When the dial on the front of the device is turned in the direction of the arrow, a click is heard and approximately 10 mm (0.4 inches) of cord is dispensed. Once the desired amount of cord is dispensed, a squeeze on the dispenser activates the cutting blade. Short Cut is available pre-loaded with 6 feet of GingiBRAID+ cord in sizes 0, 1 and 2. Clinicians may choose non-impregnated cord, cord with epinephrine or cord with aluminum potassium sulfate. Short Cut was evaluated by 13 consultants in 271 uses. It received a 93% rating.
Temp-Bond NE is a two-paste, non-eugenol temporary cement; therefore, it will not interfere with the setting of resin cements. Equal quantity of base and accelerator are dispensed and spatulated. Working time is 1:30; setting time is 4:00 in the mouth. Temp-Bond NE sets relatively hard. A softer set may be achieved by incorporating white petrolatum into the mix. Twenty-six consultants evaluated Temp-Bond NE in cementing more than 900 temporary restorations. This product received a 92% clinical rating.